| Job List |
| Job ID: |
Job-0426-0 - Director of Software Engineering |
| Job Type: |
Permanent |
| Location: |
Lake Mary, FL |
| Total Experience: |
5 Yrs |
| Description: |
This key position will plan, control and manage the design, development, implementation and enhancement of a family of software products. The Director of Software Engineering typically has ten or more reports, and the position reports directly to the Sr. VP of Integrated Engineering.
Essential functions:
- Manage the development of the company’s full line of software products.
- Plan and monitor the implementation of new software products or the maintenance of the existing product line.
- Review and validate problem reports, evaluate enhancement requests and determine appropriateness and priority of requests.
- Maximize the effectiveness of the development efforts in delivering products that meet the expectations for user satisfaction and marketability.
- Monitor and report the progress of open projects and provide high-level technical overviews to the senior staff.
- Manage the Software Development Process of each project to ensure timely completion of projects given quality, time and budgetary constraints.
- Enforce the currently established best practices for Software Development, in areas such as Source Code Control, Code Quality, Documentation and Testing. Seek for improvements to the best practices through the adoption of new procedures, techniques, methodologies and/or tools.
- Ensure that all elements of the software development and implementation process are in compliance with ISO requirements and standards.
- Promote internally a culture of
innovation supported on research. Convey product vision and
direction to internal staff.
Minimum Requirements:
- Bachelor of Science degree in Computer Science or Computer Engineering
- At least 10 years of real-world software development experience
- At least five years of leadership experience in a software development arena with a
- Management title
- Knowledge of electrical engineering, such
as reading schematics, timing diagrams, and reading technical
documentation on electronic components
Close Suburb Locations: Orlando, Sanford, Deltona, Winter Park, Altamonte Springs, Maitland, and Winter Springs
|
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0425-0 - PCB Designer |
| Job Type: |
Permanent |
| Location: |
Orlando, FL |
| Description: |
If you’re PCB Designer who is interested in designing machines that save thousands of lives, then read on…
Our client currently seeks an experienced Printed Circuit Board Designer to develop designs for medical patient monitoring products specific to the MR environment. This company is the industry leader in many devices such as X-ray, cardiovascular ultrasound, patient monitoring, and automatic external defibrillators.
You will be responsible for the design of analog, digital and RF multi-layer circuit boards.
To succeed in this position, candidates must already have the following skills/experience:
- Minimum of 3 years of experience in PCB/PWB layout design
- Familiarity with Cadence Allegro layout tool
- DFM and Lean Design Experience
- Manufacturing process and technology knowledge required
- Experience in FDA regulated environment
would be a plus
NOTE: US Citizens/Permanent residents only, please. There will be no VISA sponsorship for this position. This is also NOT an entry-level opportunity. Local candidates preferred.
Close suburb locations of Orlando: Winter Park, Lake Mary, Winter Springs, Oviedo, Heathrow, Sanford, Deland, Belle Isle, Conway, Ocoee, Winter Garden, Clermont, Kissimmee, Deltona, (Jacksonville, Leesburg, 1.5 hours from Orlando) |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0424-0 - Embedded Software Engineer |
| Job Type: |
Permanent |
| Location: |
Orlando, FL |
| Total Experience: |
5 Yrs |
| Primary Skills: |
DSP, C++, real-time, embedded |
| Secondary Skills: |
Windows CE |
| Description: |
Are you an Embedded Software Engineer with the experience and desire to put your skills to work toward the development of innovative new technology that will save lives?
If so, this could be the perfect opportunity to work with a highly talented team in developing leading edge technology.
Our well-funded client specializes in the development of threat detection technology used for military, commercial, and homeland security applications. One of their most significant accomplishments has been working in a humanitarian de-mining effort in which they developed ground-penetrating radar systems for the detection of landmines. They have also designed chemical trace detectors and personnel detectors. In order to continue to expand on this and other technologies, they are in need of an Embedded Software Engineer that will excel in a creative and autonomous work environment.
Outstanding performance in this position will require your ability to:
- Perform requirements analysis, low-level real time embedded software design, implementation, documentation, and integration testing
- Develop application software in C++ with system functionality that includes communication protocols, system I/O control, and multi-threaded architecture
- Create test capabilities to support field maintenance for end users
- Work closely with military software certification inspectors for product approval
- Debug hardware and software to resolve
system issues
Minimum requirements:
- BS degree in Computer Engineering or Computer Science (Master’s preferred)
- At least 5 years of experience in real-time embedded software engineering using C++, DSP (Digital Signal Processor) technology, and Windows CE
- Experience developing software in a structured development environment (DO-178B, CMM/SEI, MIL-STD-498)
- Ability to handle multiple projects at
once, with a track record of meeting time and budget
schedules
Close suburb locations of Orlando: Winter Park, Lake Mary, Winter Springs, Oviedo, Heathrow, Sanford, Deland, Belle Isle, Conway, Ocoee, Winter Garden, Clermont, Kissimmee, Deltona, (Jacksonville, Leesburg, 1.5 hours from Orlando) |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0422-0 - President |
| Job Type: |
Permanent |
| Location: |
St. Louis, MO |
| Description: |
Do you have the executive leadership capabilities to aggressively drive a company to achieve its full potential?
Does growing a company’s revenue from 15 million to 100 million in five years interest you?
Do you have the capability to lead the operations, conceptualize business strategy, and to create and achieve the highest level goals of the company?
Our client has been manufacturing rocket, missile, and flare launchers for the military since 1961. They are in the midst of exponential growth and need a leader with vision and integrity.
Their electronic capabilities are currently focused on custom high quality intricate electronic assemblies, wire harnesses and black boxes along with proprietary products such as hand control wands for hospital beds, wheelchair lifts and other similar operations.
The company’s long list of clients includes the US Army, US Navy, Caterpillar, General Dynamics, and several helicopter companies.
Outstanding performance in this top-level position will require your ability to:
- Lead the company’s operations, business development, and strategic initiatives.
- Act as the driving force for the executive strategies.
- Lead the manufacturing operations
- Look at market position and analyze the competition
- Assume full P&L responsibility
- Develop and achieve short and long term
goals
Qualifications for this position include:
- BS degree in Mechanical or Electrical Engineering
- MBA is strongly preferred
- At least 10 years of experience in Program Management for defense technology programs with contracts in excess of $500k
- Proven track record of leadership success
in a design and manufacturing environment
Close suburb locations: MO- St Charles, Bridgeton, Chesterfield, Valey Park, Kirkwood, Webster Groves, IL - Granite City, Madison, Fairview Heights, Edwardsville, Belleville, Colombia. |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0421-0 - Cashless Cabin Software Engineer |
| Job Type: |
Permanent |
| Location: |
Melbourne, FL |
| Description: |
Have you ever flown cross-country or overseas?
It can be extremely boring...
This is YOUR opportunity to do something about that!
Come join a team that is revolutionizing the way we spend our time when we fly!
They’re working on some very interesting, cutting-edge electronics products for use on airliners, and they need a Cashless Cabin Software Engineer will develop software applications for Mobile hand-held devices.
As a Software Engineer with our client, you will not only get to stretch the limits of your capabilities, but you will receive great benefits and perks – like flying for free on our client’s airline.
Essential Functions:
- Development of software products by writing, testing, and documenting code. (75%)
- Generate technical requirements, design
and test documentation (25%)
Minimum Qualifications:
- BS Computer Science or similar engineering degree required.
- At least 3 years of experience with programming languages – .NET Framework and C++ and/or C#
- Experience with Mobile and/or hand-held devices and applications (both strongly preferred)
- Experience with Credit Card or other “data processing” applications testing strongly preferred
- Proficient with MS Office tools including
Access, Word, Outlook, Excel, PowerPoint, and Visio
Close Suburbs Locations: Palm Bay, West Melbourne, Titusville, Rockledge, Port St. John, Cocoa Beach, Malabar, Cape Canaveral, Satellite Beach, Merrit Island, Indian Harbor Beach, Sebastian, Vero Beach |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0419-0 - InstallShield Developer |
| Job Type: |
Permanent |
| Location: |
Boca Raton, FL |
| Primary Skills: |
InstallShield, C++/C# |
| Secondary Skills: |
Database |
| Description: |
Recognized as a pioneer and market leader in alarm management and automated event notification solutions, our client has helped more than 5,000 hospitals, government agencies, manufacturing plants and other enterprise organizations to streamline communications, standardize work processes, and build an event-driven architecture that makes disparate third party systems interoperable by design. Our client’s decade of experience includes validation, project implementation and systems integration with more than 200 best-in-class input and output vendors.
Summary
The primary role of the Install Developer is to design and implement software to deliver and facilitate the deployment of product suites and solutions.
Primary responsibilities:
- Study and work with Marketing and Field Services to help create use cases and requirements
- Design, code, debug, unit test and maintenance of installation and deployment software
- Write custom actions to satisfy unique installation requirements
- Work with test, configuration management, and sustaining teams to ensure top quality software is produced
- Follow and have input into design
control/SDLC processes
Minimum Requirements:
- Bachelor’s degree in Computer Science, Computer Engineering or equivalent requisite experience
- 3 years (minimum) experience in the design and programming of software applications for MS Windows
- 2 years (minimum) recent experience in the development of installation programs using InstallShield.
- Languages/Technologies: InstallShield, MS C++, or C#.
- Operating Systems: Windows 2000 and 2003
Server, Windows XP
Pluses:
- InstallShield versions 9.x and later preferred.
- Windows Installer/MSI
- Languages/Technologies: MFC, NET Framework, Win32
- Software/Tools: Visual Studio 6, 2003 or 2005, Visual SourceSafe, MS Office
- Database: Install scripting for MS SQL Server 2000 or 2005, ODBC
- Interoperability/Component Technologies: .Net Remoting, Component Object Model (COM Servers & DLLs, ATL), RPC
- Libraries: Microsoft Foundation Classes, Standard C++, STL
- ISO 9000/13485 and/or FDA Quality System Regulation (21 CFR Part 820) experience
- Medical software experience
- Networking: TCP/IP, UDP
- Certifications: MCPD, MCTS, MCSD,
MCAD
Close Suburb Locations: West Palm Beach, Lake Worth, Boynton Beach, Delray Beach, Deerfield Beach, Coral Springs, Pompano Beach, Sunrise, Fort Lauderdale, Davie, Hollywood, (Miami 40 miles) |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0418-0 - IT Apps Consultant Manager |
| Job Type: |
Permanent |
| Location: |
Boca Raton, FL |
| Description: |
IT Applications Consultant Manager
Recognized as a pioneer and market leader in alarm management and automated event notification solutions, our client has helped more than 5,000 hospitals, government agencies, manufacturing plants and other enterprise organizations to streamline communications, standardize work processes, and build an event-driven architecture that makes disparate third party systems interoperable by design. Our client’s decade of experience includes validation, project implementation and systems integration with more than 200 best-in-class input and output vendors.
Primary Responsibilities:
- Own and be accountable for the enterprise services performance (business and financial)
- Recruit and train the team of Implementation team whose focus is Enterprise products
- Work with employee and HR appropriately to formulate employee development plans
- Process Development/Improvement -- understand and adapt the services model based on customer requirements and expectations; work with PMO to continuously improve processes
- Build an Organizational Design that drives optimized employee productivity rates
- Work in concert with Marketing to evaluate pricing & packaging on a quarterly basis to drive optimize price points, margins and profits
- Have the capabilities to successfully handle customer escalations -- understand customer issues, build a solid game plan, and execute against it
- Establish a 360 feedback mechanism for
marketing, engineering and sales to drive continuous operational
efficiencies and improvements across all departments
Technical Necessities:
- Understand complex IT systems implemented across an enterprise network and environment and be able to explain these complex systems to end-users.
- Understand the clinical implications to the monitoring environment.
- Have a solid knowledge of IT Architecture and Networking to continuously assess and improve the technical skill sets/competencies of the enterprise services team
- Ensure that the services department has
the appropriate technical skill sets to successfully implement
projects to customer satisfaction
Business Results:
- Provide recommendations regarding customer contractual agreements and Statement of Work content and assumptions so that appropriate services are delivered and revenues collected.
- By maintaining and containing departmental costs contribute to the organization meeting or exceeding revenue and IFO targets.
- Integrate knowledge of the business financials to drive business results.
- Understand the competitive landscape,
read and research regarding competitors.
Minimum Requirements
- BS in Business or Engineering or equivalent job experience
- Strong applications experience (SAP/ORACLE/Medical Records) as a vendor servicing an external client
- 5-7 years of services management experience
- Excellent oral and written communication,
presentation, and inter-personal skill
Close Suburb Locations: West Palm Beach, Lake Worth, Boynton Beach, Delray Beach, Deerfield Beach, Coral Springs, Pompano Beach, Sunrise, Fort Lauderdale, Davie, Hollywood, (Miami 40 miles)
|
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0417-0 - Technical Support Manager |
| Job Type: |
Permanent |
| Location: |
Boca Raton, FL |
| Description: |
Recognized as a pioneer and market leader in alarm management and automated event notification solutions, Our client has helped more than 5,000 hospitals, government agencies, manufacturing plants and other enterprise organizations to streamline communications, standardize work processes, and build an event-driven architecture that makes disparate third party systems interoperable by design. Our client’s decade of experience includes validation, project implementation and systems integration with more than 200 best-in-class input and output vendors.
Primary Responsibilities
- Staffs and trains team of Tier 1, 2, and 3 technical support representatives whose focus is post-implementation remote customer support.
- Working with employee and HR appropriately formulates Tier 1, Tier 2, and Tier 3 technical support development plans.
- Develops processes and procedures for responding to customer inquiries via telephone, online networks and e-mail.
- Actively participates in all infrastructure development which is the foundation for the remote support operations.
- Documents, manages, tracks, and appropriately escalates customer inquiries and resolutions following Quality and Regulatory requirements.
- Trends departmental activity to ensure that the company consistently provides world-class products and services that exceed customer expectations.
- Provides coaching to technical support staff to ensure world-class customer service.
- Actively advises organization (management
and R&D) regarding product development issues arising from
product problems and enhancements identified through technical
support contact with customers or partners.
Technical Necessities:
- Understand complex IT systems implemented across an enterprise network and environment and be able to explain these complex systems to end-users
- Knowledge of IT Architecture and Networking and the clinical implications to the monitoring environment
- Maintain knowledge of various software
revisions and system compatibilities to ensure appropriate
equipment performance
Business Results:
- Provide recommendations regarding customer contractual agreements and entitlement so that appropriate services are delivered and revenues collected
- Integrate knowledge of the business financials to drive business results
- Assess financial feasibility of utilizing 3rd party resources.
- Understand the competitive landscape,
read and research regarding competitors.
Minimum Requirements
- Bachelor's Degree in IT Management or a related science
- At least 5 years experience in computer IT Architecture.
- Experience in resolving complex technical or application problems with minimal assistance.
- At least 5 years experience in managing technical IT employees.
- Excellent oral and written communication,
presentation, and inter-personal skills.
Close Suburb Locations: West Palm Beach, Lake Worth, Boynton Beach, Delray Beach, Deerfield Beach, Coral Springs, Pompano Beach, Sunrise, Fort Lauderdale, Davie, Hollywood, (Miami 40 miles) |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0416-0 - Systems Test Engineer - 66851BR |
| Job Type: |
Permanent |
| Location: |
Orlando, FL |
| Primary Skills: |
system integration, test engineering, air defense |
| Secondary Skills: |
uml |
| Description: |
This position plays a key role in the System Integration Lab and reports to the Test Team lead and to the I&T Branch lead.
Outstanding performance in the position requires your ability to:
- Participate in the definition of detailed test plans and verification tasks in coordination with an overseas team
- Define detailed test objectives for all the verification tasks
- Define the HW/SW lab setup for all test events, including configuration maturity, required resources, instrumentation, facility, schedule, analysis techniques
- Define the End To End HWIL simulation and GUI set-up for the Orlando SIL verification tasks
- Support the integration of motion engineering hardware, software, processors, and emulators
- Support the System Stimulator software
development and testing
Minimum Requirements
- Bachelor of Science or higher in Engineering
- At least 5 years of experience in the area of Air Defense Systems and Laboratory Systems Test and Verification
- Strong background in system level architecture trade studies, including DoDAF and UML modeling and related tools is required
- Experience in the area of real-time
Hardware-in-the-Loop distributed systems is preferred
Close suburb locations of Orlando: Winter Park, Lake Mary, Winter Springs, Oviedo, Heathrow, Sanford, Deland, Belle Isle, Conway, Ocoee, Winter Garden, Clermont, Kissimmee, Deltona, (Jacksonville, Leesburg, 1.5 hours from Orlando) |
| Visa Status: |
US Citizen |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0414-0 - Systems Engineer - 76644BR |
| Job Type: |
Permanent |
| Location: |
Orlando, FL |
| Total Experience: |
5 Yrs |
| Description: |
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Masters degree. Considered career, or journey, level.
This position requires a candidate that has:
- Experience in using the DOORS™ requirements management database
- Good writing skills
- Prior experience developing subsystem
requirements
Additionally, familiarity with the operation and processing required for state-of-the-art EO fire control sensors products (gimbals and the processing of sensor imagery) is a definite plus.
Close suburb locations of Orlando: Winter Park, Lake Mary, Winter Springs, Oviedo, Heathrow, Sanford, Deland, Belle Isle, Conway, Ocoee, Winter Garden, Clermont, Kissimmee, Deltona, (Jacksonville, Leesburg, 1.5 hours from Orlando) |
| Visa Status: |
US Citizen |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0411-0 - Senior/Principal Downstream Recovery Engineer |
| Job Type: |
Permanent |
| Location: |
San Francisco, CA |
| Description: |
We seek a highly motivated Biochemical Process Engineer to join a high-caliber team of scientists & engineers to solve one of the worlds most immediate problems - clean, renewable energy. If you have a background in designing, executing, and scaling-up novel recovery processes to separate and purify various products from aqueous fermentation broths, you hold the keys to a terrific career opportunity with a fantastic company within a burgeoning new industry.
Ideally, you will be experienced in the separation of multiphase oil/water systems utilizing a variety of mechanical, chemical, and other relevant unit operations. This hands-on position requires a desire and ability to work as an integral part of a multidisciplinary team, as well as the demonstration of a high degree of flexibility, creativity, and initiative applied to the various duties and aspects of the position.
Key Performance Objectives include:
- Design, execute, and analyze critical
product recovery experiments
- Develop cost effective separation
processes to recover biofuels from complex fermentation broths
- Keep abreast of current literature and
techniques in separation science and their potential
applications
- Contribute to the company's intellectual
property portfolio, author publications in the scientific
literature, and present at industry conferences
- Analyze, write up, and present
experimental results to expedite the development of an integrated
biofuels production process in a collaborative team environment
Qualifications:
- Ph.D. degree in
Chemistry/Biochemical/Chemical Engineering or a related
discipline
- 5+ years of postdoctoral experience (or equivalent industrial experience) in a laboratory environment. B.S. or M.S. level candidates with additional relevant industrial experience will also receive consideration.
Candidate must have a solid understanding of analytic instrumentation (HPLC, LC/MS, GC/MS) and the theory and application of separation science, with consideration of process economics and scalability. Excellent written and verbal communication skills are required. Experience in the scale-up of oil/water separation processes to the pilot scale or beyond in an industrial setting (wastewater treatment, petrochemical, food, etc.) is highly desirable. Working knowledge of molecular biology, fermentation, and chemistry is a plus.
Close suburb locations: Mill Valley, San Rafael, Richmond, Vallejo, Concord, Walnut Creek, Berkeley, Oakland, Pleasanton, Fremont, Sunnyvale, Redwood City, San Mateo, Daly City, San Jose, Santa Clara |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0396-1 - Aircraft Structures Engineer |
| Job Type: |
Permanent |
| Location: |
Orlando, FL |
| Total Experience: |
5 Yrs |
| Description: |
Come join our client’s unique team of designers and integrators. They're working on some very interesting, cutting-edge electronics products for use on airliners, and we need an experienced and professional Aircraft Support Structural Engineer to perform aircraft mechanical and structural support, modification engineering and participate in the
design, development, and integration of In-Flight Entertainment Systems and components through engineering analysis, research and design.
In this position you will not only get to stretch the limits of your engineering capabilities, but you will receive great benefits and perks – like flying for free on our client’s airline.
Outstanding performance in this position will require your ability to:
- Provide structural engineering support for new installation and line activations of products onto a variety of airframes
- Evaluate components and structures of existing installations; recommend and implement product/installation improvements
- Develop engineering design and processes for evolving products
- Generate engineering installation and fabrication drawings in support of product integration
- Supports STC certification efforts for
products and installation designs
Education, Experience, and Abilities Requirements:
- B.S. degree in Structures or Aeronautics Engineering required
- Experience with both sheetmetal and composite materials for aircraft
- Experience with Boeing or Airbus aircraft
- Minimum of five (5) years experience in the aviation industry in the role of supporting maintenance and installation issues for FAA Part 21 and 145 activities
- Minimum of five (5) years experience working with aircraft Original Equipment Manufacturer (OEM) documentation including repair development and system integration, working with appropriate FAA Designated Engineering Representatives (DERs), and an understanding of aircraft structures and electrical systems, required.
- Must be willing to travel both domestically and internationally
- Valid Passport with the ability to travel
in and out of the United States
Close suburb locations of Orlando: Winter Park, Lake Mary, Winter Springs, Oviedo, Heathrow, Sanford, Deland, Belle Isle, Conway, Ocoee, Winter Garden, Clermont, Kissimmee, Deltona, (Jacksonville, Leesburg, 1.5 hours from Orlando) |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0393-0 - Mechanical Design Engineer [Pro-E] |
| Job Type: |
Permanent |
| Location: |
Orlando, FL |
| Total Experience: |
5 Yrs |
| Description: |
If you’re a Pro-E guru who is interested in designing machines that save thousands of lives, then read on…
Our client currently seeks a solid Mechanical Design Engineer to develop electromechanical designs for medical patient monitoring products specific to the MR environment. This company is the industry leader in many devices such as X-ray, cardiovascular ultrasound, patient monitoring, and automatic external defibrillators.
The candidate will be working with a hardware design team through all phases of product development and will have a leadership/project management background.
You will be responsible for:
- Product concept and definition
- Structural and thermal analysis
- Design and documentation detail of fabrication sheet metal and subassemblies
- Design using mold injected plastics
- Creation of design verification protocol
- Building prototypes as
required
To succeed in this position, candidates must already have the following skills/experience:
- BS in Mechanical Engineering
- Minimum of 5 years of experience in product design
- Experienced in mold injected plastics design
- DFM and Lean Design Experience
- Manufacturing process and technology knowledge required
- Experience in FDA regulated environment
- A high level of proficiency in Pro-E is an absolute must!
- EMI/RFI, or other previous medical device
experience is preferred.
NOTE: US Citizens/Permanent residents only, please. There will be no VISA sponsorship for this position. This is also NOT an entry-level opportunity. Local candidates preferred.
Close suburb locations of Orlando: Winter Park, Lake Mary, Winter Springs, Oviedo, Heathrow, Sanford, Deland, Belle Isle, Conway, Ocoee, Winter Garden, Clermont, Kissimmee, Deltona, (Jacksonville, Leesburg, 1.5 hours from Orlando) |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0391-0 - Pesticide Formulations Manager |
| Job Type: |
Permanent |
| Location: |
Melbourne, FL |
| Description: |
Are you someone who is seeking to utilize your experience and passion by helping to develop exceptionally innovative products with a high-energy and entrepreneurial team?
Are you excited by the challenge of developing chemical formulations that will help people without harming the environment?
If you answered yes, then we may have an opportunity just for you!
In July 2004 our well-funded client formed a company to create naturally occurring insecticide products that are superior in effectiveness than existing synthetic products. Through utilizing a technology that allows for the rapid evaluation of various naturally occurring compounds they are pioneering an entirely new industry to address a growing global demand for safe & effective urban & agricultural pesticide products. While our client has developed, tested, and proven the efficacy of several new products; they are in need of an experienced Formulation Development Manager to help them address several key formulation and application challenges.
This opportunity is ideal for someone with experience:
- Developing strategies for Insecticide
formulations
- With various types of formulations such
as emulsions, solutions, granules, powders, aerosols, creams,
dusts, baits, etc.
- Communicating with other scientists and
commercial vendors on product safety, regulations, marketing, and
legal matters
- Leading and managing development teams
This career offers significant growth potential along with the opportunity to make an impact on a fledgling industry. As a key contributor to the organization you will be responsible for integrating a variety of technologies and must have the willingness and ability to wear multiple hats at once. You will be responsible for assembling a formulations strategy for the entire product development lifecycle.
Performance objectives for this career include:
- Develop formulation strategies for a wide range of agricultural pest control,
industrial, institutional, and OTC consumer insecticidal, fungicidal and
bactericidal
products.
- Coordinate and communicate formulation concepts to internal research departments and external contract manufacturers.
- Evaluate patents and prepare non-infringement strategies
- Work effectively with external partners, resources and vendors to secure raw materials and formulation ingredients.
- Lead projects from the early exploratory phase of product development through production.
- Develop manufacturing requirements,
standards, specifications and product cost projections.
Basic Requirements:
- Experience or training in EPA and FDA
regulated industries
- Master’s (preferably Ph.D.) level training in organic, physical, or medicinal chemistry; or chemical engineering; or a 5+ year professional degree in Pharmacy (preferred concentration: Industrial Pharmacy); or an undergraduate degree in chemistry with at least 10 years of formulation development
- Experience in conventional and natural insecticide and fungicide chemistry
- Experience with traditional formulations such as emulsifiable concentrates, soluble
concentrates, granules, wettable powders, aerosols, creams, dusts, baits, and others
is essential.
- Experience in leading efforts in a
start-up environment is a plus
Some travel and lifting may be required.
Additional key words: pest control, I&I, HABA, OTC pharmaceutical, Society of Cosmetic Chemists, SCC, Formulation Chemists Society, FCS, American Chemical Society, ACS
Close Suburbs Locations: Palm Bay, West Melbourne, Titusville, Rockledge, Port St. John, Cocoa Beach, Malabar, Cape Canaveral, Satellite Beach, Merrit Island, Indian Harbor Beach, Sebastian, Vero Beach |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0386-0 - Quality Manager |
| Job Type: |
Permanent |
| Location: |
Orlando, FL |
| Description: |
This position will provide you the opportunity to perform functions to plan for, manage and control the development and implementation of the organizations total quality system to assure high quality goods, processes and services controlled by precedent and within limits of established policies.
Essential Functions:
- Manage quality systems ensuring compliance and communication of ISO9000 and ISO 17025 quality standards and goals through Total Quality.
- Manage incoming inspection functions and personnel for electronic, mechanical and optical quality control.
- Manage finished product Calibration-Certification inspection/test functions and personnel.
- Present quality systems training to new and existing employees in order to enhance employee understanding and ability to work within the quality system. Monitor system usage by employees and document resulting changes. Assess the effectiveness of the quality system.
- Administer Division internal ISO9001 auditing processes. Administer schedules and conduct meetings, participate in audits and the development of audit reports as well as the verification of actions taken on non-conformance ensuring compliance. Report on specific areas of non-conformance and recommend improvements. Prepare records and maintain files.
- Analyze department metrics in order to identify, track and review processes causing repetitive nonconforming material issues.
- Manage the vendor problem report system to ensure proper corrective actions are taken to resolve quality problems. Work directly with vendors in process and product improvement activities. Conduct new and existing vender quality surveys and assessments. Serve as member of the supplier evaluation team.
- Identify current or potential impacts of engineering changes. Communicate findings and recommend action to provide information and to influence the effectiveness.
- Assist Manufacturing, Engineering and Service staff on the resolution of quality problems on the floor. Analyze any range of engineering, production or service operations data to identify trends or out of scope conditions.
- Recommend solutions to engineering for manufacturing and assembly problems. Review technical drawings prior to release, for completeness and QC Layer inclusion. Participate in engineering discussions to continue recommendations for improvements in future designs and current production methods.
- Interview, select, recommend, hire,
train, and assign Quality Department Staff. Communicate metrics;
evaluate performance; counsel and coach employees. Maintain
harmonious employee/employer relations. Develop and implement
staffing plans and related budgets.
Other duties may include:
- Perform or assist with any departmental operations, as required or directed to maintain workflow and meet production schedules and requirements.
- Attend and participate in a variety of
meetings and task groups to integrate activities, communicate
issues, obtain approvals, resolve problems and maintain specific
level of knowledge pertaining to new developments, requirements
and policies.
Additional desired skills:
- Proficiency with Microsoft Office (esp. Excell and Word)
- Ability to use mathematical, graphic, design, and database software programs
Close suburb locations of Orlando: Winter Park, Lake Mary, Winter Springs, Oviedo, Heathrow, Sanford, Deland, Belle Isle, Conway, Ocoee, Winter Garden, Clermont, Kissimmee, Deltona, (Jacksonville, Leesburg, 1.5 hours from Orlando)
|
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0385-0 - Buyer |
| Job Type: |
Permanent |
| Location: |
Melbourne, FL |
| Description: |
Have you ever flown cross-country or overseas?
It can be very boring…
This is YOUR chance to do something about that!
Come join a team that is revolutionizing the way we spend our time when we fly!
Our client is currently working on some very interesting, cutting-edge electronics products for use on airliners. In order to advance this development they need a Buyer to facilitate the company procurement process.
As a Buyer with our client, you will not only get to stretch the limits of your acquisition capabilities, but you will also receive great perks – like flying for free on our client’s airline.
Performance Objectives:
- Procure high-dollar structural components
- Place subcontract and standard purchase orders to fill part requisitions and fit customer demand and supply requirements
- Expedite repair and purchase orders
- Source and maintain relationships with competitive vendors and manufacturers
- Apply cost reduction strategies where
possible to save money overall
Requirements:
- High School Diploma or General Education Development (GED) Diploma required
- Bachelor’s degree preferred
- At least five years of professional procurement experience
- Previous experience with SAP Inventory Management is a plus
- Previous experience in the airline and/or electronics industry is a plus
- Pass a ten (10) year background check and pre-employment drug test
- MUST BE A US CITIZEN
Close Suburbs Locations: Palm Bay, West Melbourne, Titusville, Rockledge, Port St. John, Cocoa Beach, Malabar, Cape Canaveral, Satellite Beach, Merrit Island, Indian Harbor Beach, Sebastian, Vero Beach |
| Go to Top |
Respond to this Job by Web Form |
|
| Job ID: |
Job-0384-0 - Senior Analytical Chemist |
| Job Type: |
Permanent |
| Location: |
Melbourne, FL |
| Description: |
Did you know that most of the oil we extract from the ground is made up of algae that has been dead for thousands of years?
Did you also know that by 2030, the world will require an additional 500 billion gallons of oil?
In September of 2006 our well-funded client formed a company that will forever change the complexion of the petrochemical industry. Instead of waiting around for thousands of years for dead algae to produce oil, they are utilizing a patented strain of micro-algae in conjunction with a proprietary modular cultivation process that allows them to extract biofuel while the algae is still alive. This proven technology creates 200 times more energy per acre than traditional biofuel crops and produces renewable feedstock oils for use in applications ranging from transportation fuels, heating oils, plastics, food and oil.
These technologies place them in a leading position to address an ever increasing multi-hundred billion dollar global market for sustainable and affordable sources of petroleum-derived products.
Our client currently seeks a Senior Analytical Chemist to join the R&D team to identify, design, and develop analytical methods and laboratory analysis of bio-organic compounds.
Within the role of Senior Analytical Chemist your will be responsible for:
- Developing experiments to determine variables affecting algae growth rates, lipid content, and other variables involved in algae to oil production
- Multi-variant experimental models
- Using your knowledge in biological extraction, purification, and staining to develop multi-variant experimental models
- Generate, analyze, and interpret test results
- Generate and present reports to scientists, engineers, and managers
- Find and supervise appropriate outside
vendors and contractors
Provide leadership to all lab personnel so that they deliver very rapid turnaround of analytical results to process development teams in multiple locations
Organize and supervise more junior
scientists
Outstanding performance in this position
requires:
- Familiarity with algae and
microbiology
- Strong knowledge of chemical process
engineering and process flow design
- Proficiency in operating scientific
equipment
- Supervisory skills in a laboratory
environment (preferably in multiple lab locations)
Qualifications (all of these are absolutely
essential):
- PhD (preferred) ; MS (required)
- Familiarity with GC, NIR, UV, and HPLC
laboratory equipment
- Experience with proteins and oil/lipid
analysis
- Minimum 5 years laboratory experience
- Minimum 2 years lab supervisory
experience
We are
looking for people who are passionate about this technology and
its implications for our future. This is a high-octane research
environment, and only those with an established and verifiable
track record of success will be considered.
Close Suburbs Locations: Palm Bay, West
Melbourne, Titusville, Rockledge, Port St. John, Cocoa Beach,
Malabar, Cape Canaveral, Satellite Beach, Merrit Island, Indian
Harbor Beach, Sebastian, Vero Beach |
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0379-0 - Staff Chemist |
| Job
Type: |
Permanent |
| Location: |
Melbourne Florida |
| Description: |
Requirements:
- Master’s degree in Chemistry preferred,
BS required
- Minimum of two years laboratory
experience
- Capability to operate scientific
equipment
- Strong knowledge of chemical process
engineering and process flow design
- Familiarity with algae
- Sterile culture techniques
- Ability to perform as part of process
design team
- Ability to interact with academic
institutions
Duties:
- Laboratory analysis of bio-organic
compounds
- Conceptual design of chemical
processes
- Generation of, interpretation, and
analysis of test results
- Report generation and presentation
- Design and analysis in field
facilities
- Working with outside vendors and
contractors
Close Suburbs
Locations: Palm Bay, West Melbourne, Titusville, Rockledge, Port St.
John, Cocoa Beach, Malabar, Cape Canaveral, Satellite Beach, Merrit
Island, Indian Harbor Beach, Sebastian, Vero Beach |
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0378-0 - Sr. Facilities Technician |
| Job
Type: |
Permanent |
| Location: |
Melbourne Florida |
| Description: |
About the
Company
In September 2006 our
well-funded client formed a company using a technology that will
allow the US to attain energy independence. By using a patented
strain of algae in conjunction with a proprietary modular
cultivation process, they hold the keys to an environmentally
friendly and self-sustaining energy source that is far cheaper than
currently existing biofuel solutions. This proven technology creates
200 times more energy per acre than traditional biofuel crops and
produces renewable feedstock oils for use in applications ranging
from transportation fuels, heating oils, plastics, food and oil.
These technologies place them in a leading position to address an
ever increasing multi-hundred billion dollar global market for
sustainable and affordable sources of petroleum derived products.
About the Opportunity
In order to move to the next phase in
developing this process our client seeks an experienced and creative
Senior Facilities Technician to assist
in the development and maintenance of their pilot and production
facilities. Working with scientists, engineers, and construction
personnel, you will independently be responsible for sourcing,
installing, integrating, and maintaining various types of
water/wastewater components. Only candidates with advanced plumbing
and electrical systems experience will be considered. This career
offers excellent job stretch and the opportunity to contribute to a
brand new industry.
Performance
objectives
- Provide leadership and guidance to other
technicians
- Provide innovative equipment solutions to
current process challenges
- Identify and integrate necessary
electrical and plumbing components; including the product
sourcing, ordering, installation, and maintenance
- Plan work by studying blueprints,
diagrams, specifications
- Identify necessary component
requirements
- Install piping by measuring, cutting,
bending, shaping, fabricating, threading, soldering, and gluing
pipe using hand tools and equipment
- Maintain safe and healthy work
environment by following standards and procedures; complying with
legal regulations.
- US CITIZENSHIP OR
PERMANENT RESIDENCY REQUIRED
Skills/Qualifications :
- At least 8 years of plumbing, Electrical,
Welding and Fabrication, Supply Management, Documentation Skills,
Basic Safety, Equipment Maintenance, Problem Solving, Creativity,
Lifting
This opportunity offers
excellent benefits and the opportunity to collaborate with some of
the highest caliber scientific people in developing the technologies
and companies of tomorrow.
Close Suburbs
Locations: Palm Bay, West Melbourne, Titusville, Rockledge, Port St.
John, Cocoa Beach, Malabar, Cape Canaveral, Satellite Beach, Merrit
Island, Indian Harbor Beach, Sebastian, Vero Beach |
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0377-0 - Instrumentation Technician |
| Job
Type: |
Permanent |
| Location: |
Melbourne Florida |
| Description: |
Are you interested in making significant
contributions to the world while working with high energy,
intelligent people?
Do you enjoy working on challenging assignments
that stretch your abilities to the limit and require learning new
technologies fast?
Does working within a fast growing startup
organization in an explosive new industry sound appealing to you?
If you answered yes to the above questions please read on
to see if you are the person we seek for this outstanding career
opportunity.
As a
newly developed and well-funded organization, our client is in the
startup phase of commercializing a new process for the creation of
various types of petrochemical products. Through the application of
proven biological principles our client has identified a means of
directly converting solar energy into petrochemical-based products
through the use of an environmentally friendly algae. This proven
technology creates 200 times more energy per acre than traditional
biofuel crops, and produces renewable feedstock oils for use in
applications such as transportation fuels, heating oil, plastics,
and food and oil. This development places our client in a leading
position to address an ever-increasing multi-hundred billion dollar
global market for sustainable and affordable sources of petroleum
derived products.
Our fast growing client now seeks an Instrumentation Technician to maintain
calibration standards, pH, flow, temperature, pressure,
conductivity, etc using PLC/DCS control methods, automated systems,
load cells, control valves, and preventative maintenance.
The type of background we are looking
for:
- At least three years of experience with
instrumentation and/or electronics engineering
- Proficient with installation, maintenance
and repair of industrial process controls and measurement
equipment
- Experience in Industrial electrical
Distribution, schematics and line diagrams
- Thorough knowledge of PLCs
- High school diploma required, CST
Certificate preferred
Close Suburbs Locations: Palm Bay, West
Melbourne, Titusville, Rockledge, Port St. John, Cocoa Beach,
Malabar, Cape Canaveral, Satellite Beach, Merrit Island, Indian
Harbor Beach, Sebastian, Vero Beach
|
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0376-0 - Oil Chemist |
| Job
Type: |
Permanent |
| Location: |
Melbourne, FL |
| Description: |
Are you interested in making significant
contributions to the world while working with high energy,
intelligent people?
Do you enjoy working on challenging assignments
that stretch your abilities to the limit and require learning new
technologies fast?
Does working within a fast growing startup
organization in an explosive new industry sound appealing to you?
If you answered yes to
the above questions please read on to see if you are the person we
seek for this outstanding career opportunity.
As a newly developed
and well-funded organization, our client is in the startup phase of
commercializing a new process for the creation of various types of
petrochemical products. Through the application of proven biological
principles our client has identified a means of directly converting
solar energy into petrochemical-based products through the use of an
environmentally friendly algae. This proven technology creates 200
times more energy per acre than traditional biofuel crops, and
produces renewable feedstock oils for use in applications such as
transportation fuels, heating oil, plastics, and food and oil. This
development places our client in a leading position to address an
ever-increasing multi-hundred billion dollar global market for
sustainable and affordable sources of petroleum derived products.
Our fast growing
client now seeks an Lipid Chemistry
Manager to help manage a team of chemists to extract, purify and
test organic compounds from biomass and bioreactors to assist in the
development of advanced biofuels.
If this sounds like an opportunity you would
like to get more information about AND if you have very well-rounded
laboratory skills, are self-motivated, possess a positive attitude,
and have a track record of success send us your resume and let's
talk!
Performance Objectives:
- Manage a high-caliber team of scientists
to characterize and analyze the various lipid contents from
various biomass and bioreactor processes.
- Design experiments to increase the output
of preferred lipid substances for the purposes of energy, food, or
biodiesel.
Qualifications
- MUST BE US
CITIZEN, OR LEGALLY ELIGIBLE TO WORK IN THE US
- Bachelor's degree in Chemistry (Master's
or PhD preferred)
- Background in lipid chemistry
- Understanding of fuel properties and
petrochemical testing
- Ability to work in lab and conduct
experimental work
- Experienced with data and system
analysis
- Creative, independent thinker who posses
initiative
- High energy, capable of handling a
fast-paced, multicultural environment
- Track record of success in managing other
technical professionals.
If working within a
high-caliber, diverse team designing and implementing experiments to
test properties of potential new fuel & oil molecules sounds
compelling to you, we look forward to reviewing your resume.
Close Suburbs Locations: Palm Bay, West
Melbourne, Titusville, Rockledge, Port St. John, Cocoa Beach,
Malabar, Cape Canaveral, Satellite Beach, Merrit Island, Indian
Harbor Beach, Sebastian, Vero Beach |
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0370-0 - Software Engineer |
| Job
Type: |
Permanent |
| Location: |
Melbourne, FL |
| Primary Skills: |
C++, HTML, ASP, Linux |
| Description: |
Have you ever flown cross-country or
overseas?
It can be
very boring…
This is YOUR opportunity to do
something about that!
Come join a team that is revolutionizing the
way we spend our time when we fly!
They’re working on some very interesting,
cutting-edge electronics products for use on airliners, and they
need a Software Engineer to develop applications using C++, ASP, and
HTML while working within a Linux-based system.
As a Software Engineer with our client, you will
not only get to stretch the limits of your software capabilities,
but you will receive great benefits and perks – like flying for free
on our client’s airline.
Essential Functions:
- Development of software products by
writing, testing, and documenting code. (80%)
- Generate technical requirements and
processes (15%)
- Provide guidance and training to other
functional groups. (5%)
Minimum Qualifications:
- BS Computer Science required
- Proficiency in programming languages
including C++, HTML, ASP and Linux scripting languages required
- 5 years of experience with embedded
applications, team software development projects, database
applications, user-based applications highly preferred
- Pass a ten (10) year background check and
pre-employment drug test
Knowledge, Skills, and
Abilities:
- Proficient with MS Office tools including
Access, Word, Outlook, Excel, PowerPoint, and Visio
- Ability to interact with a wide range of
customer groups, both internal and external
- Possess excellent verbal and written
communication skills
Close Suburbs
Locations: Palm Bay, West Melbourne, Titusville, Rockledge, Port St.
John, Cocoa Beach, Malabar, Cape Canaveral, Satellite Beach, Merrit
Island, Indian Harbor Beach, Sebastian, Vero Beach |
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0361-1 - Senior Transportation Engineer |
| Job
Type: |
Permanent |
| Location: |
Orlando, FL |
| Description: |
Are you a seasoned Transportation Engineer
adept at leading other high caliber engineers? Do you seek both a
technical and managerial challenge within a small to mid sized
company? Are you looking for a position offering job stretch and
significant growth within a stable company? If you answered 'yes' to
the above questions you may be the person we seek....
Our small to mid sized
client has been providing transportation and infrastructure planning
support to businesses, hotels, hospitals, cities and counties for
nearly 20 years. They provide world-class services for a number of
government and private entities. Staffed by top-notch engineers with
a broad blend of abilities and experience; you will immediately
realize that you are part of an elite group.
As the Senior Transportation Engineer you will
direct and manage the budgeting and execution of projects providing
high level technical support. In addition you will manage and
nurture existing client relationships while managing a staff of 7-9
engineers. Working with the Project Mangers you will manage tasks,
analyze transportation challenges and write technical reports. This
position reports directly to the Senior Transportation Project
Manager.
Outstanding performance will depend upon your
ability to:
- Manage, motivate, and support a small
team of engineers to provide technical analysis in geometric and
signal design, signal timing plans, ITS, quality/level of service
analysis, site impact analysis, transportation planning, etc.
- Conduct traffic impact analysis, capacity
analysis, traffic signal warrant and design, travel demand
modeling, traffic simulation modeling, and access
analysis/design.
- Manage projects and/or tasks under the
direction of Project Managers.
- Assist in the supervision of other staff
members.
- Prepare written summaries of
analysis.
Minimum qualifications
include:
- Bachelors Degree in Transportation
Engineering
- At least 10 years of experience
- Proficiency with various traffic modeling
software
- Ability to work collaboratively within a
team environment
- Excellent verbal and written
communication skills
Our client provides excellent compensation
& benefits, including health insurance, term life Insurance,
401K, education reimbursement, and a bonus program.
Close suburb locations of Orlando: Winter Park,
Lake Mary, Winter Springs, Oviedo, Heathrow, Sanford, Deland, Belle
Isle, Conway, Ocoee, Winter Garden, Clermont, Kissimmee, Deltona,
(Jacksonville, Leesburg, 1.5 hours from Orlando) |
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0358-0 - Program Manager |
| Job
Type: |
Permanent |
| Location: |
Melbourne, FL |
| Total Experience: |
5
Yrs |
| Description: |
Have you ever flown cross-country or
overseas?
It can be
extremely boring...
This is YOUR opportunity
to do something about that!
Come join a team that is revolutionizing the
way we spend our time when we fly!
They’re working on some very interesting,
cutting-edge electronics products for use on airliners, and they
need a Senior-Level Program Manger to
manage development and production programs for modification,
certification, installation and maintenance of in-flight
entertainment systems and products on commercial aircraft.
As a Program Manager
with our client, you will not only get to stretch the limits of your
capabilities, but you will receive great benefits and perks – like
flying for free on our client’s airline.
Essential Functions:
- Manages all aspects of the Customer
relationship and meet the reliability, compliance, cost and
schedule requirements of the program.
- Ensures that all resources such as
engineering, installation, maintenance and subcontractors are
available for the program .
- Coordinates closely with the Customer and
work through multi-functional organization to develop and execute
program plan.
- Prepares plans, reports and presentations
to communicate to Customers, other Team members and
subcontractors.
- Manages within a multi-function, matrix
organization.
Minimum Qualifications:
- Bachelor’s Degree in Engineering or
equivalent, Master’s Degree in Business Administration
preferred
- Minimum five (5) years experience in
Program Management of large programs
- Minimum of three (3) years of Federal
Aviation Administration and/or commercial airline industry
experience
Knowledge, Skills, and
Abilities:
- Proficient with MS Office tools including
Access, Word, Outlook, Excel, PowerPoint, and Visio
- Ability to interact with a wide range of
customer groups, both internal and external
- Possess excellent verbal and written
communication skills
Close Suburbs Locations: Palm Bay, West
Melbourne, Titusville, Rockledge, Port St. John, Cocoa Beach,
Malabar, Cape Canaveral, Satellite Beach, Merrit Island, Indian
Harbor Beach, Sebastian, Vero Beach |
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0356-0 - Algae Operations Scientist |
| Job
Type: |
Permanent |
| Location: |
Palm
Bay, Florida |
| Description: |
In September 2006 our well funded client formed
a company that will forever change the complexion of the
petrochemical industry. Utilizing a patented strain of micro-algae
in conjunction with a proprietary modular cultivation process, they
hold the keys to an environmentally friendly and self-sustaining
energy source that is far cheaper than existing biofuel solutions.
This proven technology creates 200 times more energy per acre than
traditional biofuel crops and produces renewable feedstock oils for
use in applications ranging from transportation fuels, heating oils,
plastics, food and oil. These technologies place them in a leading
position to address an ever increasing multi-hundred billion dollar
global market for sustainable and affordable sources of petroleum
derived products.
If you are interested in getting in on the
ground floor of an exceptional company producing an extraordinary
product and working with some of the brightest individuals on the
planet, please read on...
At the present time our client has a
significant need for an Algae Operations
Scientist in order to capitalize on the rapidly growing biofuel
market. The Operations Scientist will help Algae Growth Scientists
to set up and run algae growth and harvest experiments and
pilot-scale processes, in the lab as well as in field experimental
farms and pilot production farms.
Superior performance within this position
requires an individual who is highly self-motivated and capable of
working with little direction. Requires aquaculture experience,
biological and chemical laboratory proficiency, computer literacy,
strong quantitative analysis skills, good listening and writing and
speaking skills, and comfort working in both lab and farm
environments. Local travel is required.
Responsibilities:
- Set up and operate algae growth and
harvest experiments, including all necessary equipment (tanks,
pumps, plastic piping, sensors, centrifuges, etc.)
- Collect and analyze experimental
performance data, and create draft reports
- Operate general biological and chemical
laboratory equipment including analytical instrumentation (i.e.
GC, spectrophotometer, etc.)
- Employ sterile techniques for algal
culture operations
- Provide general assistance as needed to
the research and engineering staff
- Work in unstructured, relatively
unsupervised environment
- Local travel required
Education
BS in chemistry, biology, or environmental
science
This
opportunity offers excellent benefits and the opportunity to
collaborate with some of the highest caliber scientific people in
developing the technologies and companies of tomorrow.
Close Suburbs Locations: Palm Bay, West
Melbourne, Titusville, Rockledge, Port St. John, Cocoa Beach,
Malabar, Cape Canaveral, Satellite Beach, Merrit Island, Indian
Harbor Beach, Sebastian, Vero Beach |
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0349-2 - Applied Mathematician |
| Job
Type: |
Permanent |
| Location: |
Lake
Mary, FL |
| Total Experience: |
3yrs |
| Description: |
Are you a high-caliber Algorithms Maestro? We
really are looking for the absolute
best.
We’re
looking for the best because our client is THE global market leader
in portable, robotic, computer-aided measurement arms and lasers.
This $250M, ISO-9001 certified and ISO-17025 laboratory registered
company is currently expanding its engineering department. They are
now seeking a Mathematical Savant to
create mathematical models, computer simulations, and production
procedures related to state-of –the-art metrology products.
This is an excellent
growth opportunity for a creative mathematician who wishes to
stretch their analysis, optimization and algorithm design skills.
Outstanding performance in this position will
require your ability to:
- Develop mathematical models and computer
simulations of potential end-user product errors used in the
design and development of new products
- Develop algorithms for length and angle
corrections due to temperature change or stress
- Develop procedures and software to
compensate, characterize and calibrate products. Document results
in new or established databases.
- Analyze results and develop new
compensation schemes that improve product accuracy and
stability
- Identify and evaluate new technology,
determining how it may be applicable to the organization’s product
line or operations
Requirements
- MS in Applied Mathematics (PhD
preferred)
- Experience with machines, 3D geometry and
modeling of 3D mechanical systems
- Experience with mathematics of least
squares optimization , linear algebra, vector and matrix math, and
modeling of properties of materials (CTE, bending) in a complex 3D
system
- Algorithms must be developed and coded in
our client's product (C++, C#, .NET), therefore, some software
development experience is necessary
- US CITIZENSHIP or
PERMANENT RESIDENCY required
Extra credit for experience with metrology
equipment!
Note: This is NOT a position for someone with a
background in statistics, probability, or teaching math.
Base salary:80-95k (based on background and
experience level)
Benefits: Up to 10% discretionary bonus.
Standard insurance and PTO benefits of a high-end engineering
company
Keywords: optimization, matrix, vector, linear
algebra, machine design, Young's modulus, CTE, C#, .NET, 3D,
FEA
Close Suburb Locations: Orlando, Sanford,
Deltona, Winter Park, Altamonte Springs, Maitland, and Winter
Springs |
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0349-1 - Lead Mechanical Engineer |
| Job
Type: |
Permanent |
| Location: |
Lake
Mary, FL |
| Total Experience: |
5
Yrs |
| Description: |
Are you a high-caliber Mechanical Designer? We
really are looking for the absolute
best.
Imagine a
team of Archeologists who use your company's technology to digitally
recreate a 3-D environment and broadcast it to the world... Only
days after they have uncovered it. Thanks to YOUR team.
Imagine being able to
digitally experience every single historical building from anywhere
in the world.. Thanks to technology created by YOUR team.
Picture a team of
miners SAFELY and SUCCESSFULLY burrowing through the Earth all the
while creating a digital re-creation while they dig. Thanks to YOUR
team.
Your team is
ready.. Where are YOU?
We’re looking for the best because our client
is THE global market leader in portable, robotic, computer-aided
measurement arms and lasers. This $250M, ISO-9001 certified and
ISO-17025 laboratory registered company is currently expanding its
engineering department. They are now seeking a Lead Mechanical Engineer to lead a team and
get hands-on in the design of plastic, die cast, carbon composite
and machined parts and products.
This is an ideal job for a Mechanical Engineer
that will provide the intellectual and technical challenges of a
highly diverse manufacturing/engineering experience. As part of the
creative engineering team you will have a direct impact on the
creation of innovative, state-of-the-art metrology products.
A team of two MEs and
a mechanical designer will report directly to you, and you will
report directly to the Vice President of Research and
Development.
Outstanding performance in this position will
require your ability to:
- Create designs for injection molded parts
(not tools), stamped metal parts, die cast parts (not tools), and
precision machined parts
- Develop products for customer use,
utilizing effective style and usability
- Prepare CAD drawing and models of
designated product or fixture. Calculate and lay out dimensions,
angles, curvature of parts, materials to be used, and relationship
of various parts to entire structure
- Coordinate machining processes; determine
needs of machine shop to fulfill the production requirement and be
available to clarify design instructions.
- Lead a group of talented designers to
continually increase the standards and performance of the
engineering team
Physical
Requirements
Continuous lightweight
lifting, some lifting of light to average weight materials and
occasional lifting of heavy weight materials over 60 lbs. Frequent
bending and stooping, pushing, pulling, and sitting.
Education & Experience Requirements:
- BS in Mechanical Engineering (MS
preferred) or similar degree
- Minimum of five years experience
- Proficiency with SolidWorks or ProE
- Experience in design for manufacturing
and assembly (DFA, DFM).
- Supervisory or Team Leader experience
- US CITIZENSHIP or
PERMANENT RESIDENCY required
Extra credit for experience with designs
using precision bearings, optical encoders, rotating joints, optical
lasers, or articulated robots!
Base salary:90-105k (based on background
and experience level)
Benefits: Standard insurance and PTO
benefits of a high-end engineering company
Keywords: CMM, robot, DFA, DFM, DFMA, FEA,
encoder, metrology, design, FMEA, molded plastic, aluminum die cast,
bearings
Close Suburb Locations: Orlando, Sanford,
Deltona, Winter Park, Altamonte Springs, Maitland, and Winter
Springs
|
| Go to Top |
Respond to this Job by Web
Form |
|
| Job ID: |
Job-0349-0 - Lead Electrical Engineer |
| Job
Type: |
Permanent |
| Location: |
Lake
Mary, FL |
| Total Experience: |
5
Yrs |
| Description: |
Are you a high-caliber Hardware Designer? We
really are looking for the absolute
best.
We’re
looking for the best because our client is THE global market leader
in portable, robotic, computer-aided measurement arms and lasers.
This $250M, ISO-9001 certified and ISO-17025 laboratory registered
company is currently expanding its engineering department. They are
now seeking a Lead Electrical Engineer
to lead a team and get hands-on in digital and analog circuit design
using microprocessors, DSP, FPGA, low noise instrument amplifiers,
active filters, switched capacitor filters, optical encoders, VHDL,
VCSEL, USB, Bluetooth, and Class 2 lasers.
This is an ideal job
for a Electrical Engineer that will provide the intellectual and
technical challenges of a highly diverse manufacturing/engineering
experience. As part of the creative engineering team you will have a
direct impact on the creation of innovative, state-of-the-art
metrology products.
A team of two EEs, an Electrical Tech, and a
PCB Layout Tech will report directly to you, and you will report
directly to the Vice President of Research and Development.
Outstanding performance in this position will
require your ability to:
- Perform sophisticated component, circuit,
and board design for a variety of industry-leading robotics
products
- Design circuits at schematic level and
take the design through modeling, prototype, build, and test
stages
- Work with the compliance agency to gain
acceptance and sustaining
- Lead a group of talented designers to
continually increase the standards and performance of the
engineering team
This position requires
a candidate to have:
- BS in Electrical Engineering (MS
preferred) or related degree
- At least 5 years experience with design
and support of high speed digital and low voltage analog
circuitry
- Supervisory or Team Leader experience
- US CITIZENSHIP or PERMANENT RESIDENT
status
Extra credit for experience with optical
encoders and lasers!
Base salary: 80-95k
(based on background and experience level)
Benefits: Standard
insurance and PTO benefits of a high-end engineering company
Keywords: DSP, Blackfin, encoder, laser,
microprocessor, metrology, Coldfire, VCSEL, USB
Close Suburb Locations: Orlando, Sanford,
Deltona, Winter Park, Altamonte Springs, Maitland, and Winter
Springs |
| Go to Top |
Respond to this Job by Web
| |